18
16.
Sunlight Display Units(default: W/
㎡
)
. Press the
SET(MODE)
key
again to change the sunlight units of measure. Press the [+] key or
[
-
] key to toggle the sunlight units between ,
W/
㎡
, fc
or lux.
17. Location division.(default: Northern Hemisphere).
Press the
SET(MODE)
key again to change the location division. Press the [+]
key or [
-
] key to toggle the sunlight units Northern Hemisphere
(NOR)or Southern Hemisphere(SOU). (
refer to 5.0 Final
Installation of Integrated outdoor transmitter
)
7.3 Reset Min/Max record
In normal mode, press (do not hold) the
MIN/MAX/-
key
,
the
MAX
icon
will be displayed in date area. Press the
SET/MODE
key to view max
values of rainfall (rate, 24h, week or month) , pressure (ABS or
REL),outdoor temperature and humidity(AT or dewpoint)and indoor
temperature and humidity (temp or dew point).
Press the
MIN/MAX/-
key for three seconds to clear all max values.
（
the rainfall, wind speed, wind gust, pressure, temperature and humidity
maximum values. The maximum values will now display the current
values
）
.
Press the
MIN/MAX/-
key again (do not hold), the
MIN
icon will be
displayed. Press the
SET/MODE
key to view min values of pressure
(ABS or REL), outdoor temperature/humidity((AT or dew point),and
indoor temperature/humidity(temp or dew point).
Press the
MIN/MAX/-
key for three seconds to clear all min values.(the
pressure, temperature and humidity minimum values. The minimum
values will now display the current values).
Press the
SNOOZE
key to exit the min/max checking and cleaning
mode, return to normal display mode.
7.4 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press the
SNOOZE
key, the backlight will turn on. The alarm icon will continue to
flash and the alarm will silence for five minute. press any key
