16
once for time, time/week and second,
Twice for rainfall
three for outdoor dew point temperature.
four for wind average
Five for pressure
1.
Time, Time/Week and Second.
Press the
C or
MIN/MAX/-
key to toggle between time, time/week and second.
2.
Rainfall.
Press the
C
or
MIN/MAX/-
key to toggle between
rate, 24h, week, month and total.
To clear the total rain, press the
C
or
MIN/MAX/-
button
until total rain is displayed. The total rain will flash.Press and hold the
SET
button for five seconds until total rain reads 0.0.
3.Outdoor Dew Point.
Press the
C
or
MIN/MAX/-
key to
toggle between AT
（
Apparent Temperature) and dew point.
4.Wind Average.
Press the
C
or
MIN/MAX/-
key to toggle
between current,2mins and 10 minutes.
5.
Absolute Pressure and Relative Pressure.
Press the
C
or
MIN/MAX/-
key to toggle between absolute pressure and relative
pressure.
7.2 Set (Program) Mode
While in Normal Mode, press
and hold
the
SET(MODE)
key for at least
three seconds to enter the Set Mode. The first setting will begin flashing.
You can press the
SET(MODE)
key again to skip any step, as defined
below.
Note:
In the Set mode, press the [+] key or [
-
] key to change or
scroll the value. Hold the [+] key or [
-
] key for three seconds to
increase/decrease rapidly.
Note:
To exit the Set mode at any time, press the
SNOOZE
button
of the display console.
1. Time SYNC(default:ON).
Press the SET key again to set the
network time sync. Press the [+] key or [-] key to switch between
SYNCtime ON and SYNCtime OFF of measure.
2.
12/24 Hour Format (default: 24h):
.Press the
SET(MODE)
key
again to adjust the 12/24 hour format setting (FMT). Press the [+]
key or [
-
] key to change between 12 hour and 24 hour format.
3.
Change Hour.
press the
SET(MODE)
key again to set the hour.
Press the [+] key or
[-]
key to adjust the hour up or down. Note the
PM icon is present during afternoon hours.
