17
2.
Alarm minute(alarm 1)
3.
Alarm hour(alarm 2)
4.
Alarm minute(alarm 2)
5.
Outdoor temperature high alarm
6.
Outdoor temperature low alarm
7.
Outdoor humidity high alarm
8.
Outdoor humidity low alarm
9.
Outdoor AT high alarm
10.
Outdoor AT low alarm
11.
Outdoor dew point high alarm
12.
Outdoor dew point low alarm
13.
Outdoor feels like high alarm
14.
Outdoor feels like low alarm
15.
Wind Gust high alarm
16.
Wind Average high alarm
17.
Rainfall (RATE) high alarm
18.
Rainfall (24h) high alarm
19.
Absolute pressure high alarm
20.
Absolute pressure low alarm
21.
Relative pressure high alarm
22.
Relative pressure low alarm
23.
Indoor temperature high alarm
24.
Indoor temperature low alarm
25.
Indoor humidity high alarm
26.
Indoor humidity low alarm
27.
Indoor dew point high alarm
28.
Indoor dew point low alarm
29.
UV Index high alarm
30.
Sunlight high alarm
Note:
To prevent repetitive temperature alarming, there is a 0.5 °C tolerance band. For
example, if you set the high alarm to 26.7 °C and silence the alarm, the alarm icon will
continue to flash until the temperature falls below 26.2°C, at which point, the alarm will
reset and must increase above 26.7 °C to activate again.
Note:
To prevent repetitive alarming of humidity, there is a 4% tolerance band in hu-
midity alarm. For example, if you set the high alarm to 60% and silence the alarm, the
alarm icon will continue to flash until the humidity falls below 56%, at which point, the
alarm will reset and must increase above 60% to activate again.
8.4 Alarm and Command Key Beeper ON/OFF Mode
The beeper can be silenced for both alarms and key strokes.
In normal mode, press and hold the
ALARM
key for three seconds to toggle the beeper on
or off (depending on the current setting).
The
BZON
(beeper on) or
BZOFF
(beeper off) icon will appear in the time area for three
seconds. press and hold the
ALARM
key again for three seconds to toggle the
BZON
or
BZOFF
command.