13
the batteries in the sensor with fresh batteries. Be sure to never mix old and new batteries,
and never mix battery types such as alkaline and lithium together.
7.Console Operation
Note:
The console has five keys for easy operation:
MIN/MAX/-
key,
ALARM
key,
SET/MODE
key,
C
and
SNOOZE
key.
7.1 Quick Display Mode
Note:
To exit the Quick Display Mode at any time, press the
SNOOZE
key of the dis-
play console.
While in Normal Mode, press (do not hold) the
SET/MODE
key to enter the Quick Dis-
play Mode as follows:
•
once for time, time/week and second,
•
Twice for rainfall
•
three for outdoor dew point temperature.
•
four for wind average
•
Five for pressure
1.
Time, Time/Week and Second.
Press the
C or MIN/MAX/-
key to toggle
between time, time/week and second.
2.
Rainfall.
Press the
C
or
MIN/MAX/-
key to toggle between rate, 24h,
week, month and total.
To clear the total rain, press the
C
or
MIN/MAX/-
button until total rain is
displayed. The total rain will flash. Press and hold the
SET
button for five seconds until
total rain reads 0.0.
3.Outdoor Dew Point.
Press the
C
or
MIN/MAX/-
key to toggle between AT
（
Apparent Temperature) and dew point.
4.Wind Average.
Press the
C
or
MIN/MAX/-
key to toggle between cur-
rent,2mins and 10 minutes.
5.
Absolute Pressure and Relative Pressure.
Press the
C
or
MIN/MAX/-
key
to toggle between absolute pressure and relative pressure.
7.2 Set (Program) Mode
While in Normal Mode, press
and hold
the
SET(MODE)
key for at least three seconds to
enter the Set Mode. The first setting will begin flashing. You can press the
SET(MODE)
key again to skip any step, as defined below.
Note:
In the Set mode, press the [+] key or [
-
] key to change or scroll the value. Hold
the [+] key or [
-
] key for three seconds to increase/decrease rapidly.
Note:
To exit the Set mode at any time, press the
SNOOZE
button of the display con-
sole.
1.
Time SYNC(default: ON).
Press the SET key again to set the network time sync.
Press the [+] key or [-] key to switch between SYNC time ON and SYNC time OFF of
measure.
2.
12/24 Hour Format (default: 24h):
.Press the
SET(MODE)
key again to adjust the
12/24 hour format setting (FMT). Press the [+] key or [
-
] key to change between 12
hour and 24 hour format.
3.
Change Hour.
press the
SET(MODE)
key again to set the hour. Press the [+] key or
[-
]
key to adjust the hour up or down. Note the PM icon is present during afternoon hours.