Sailrite Craftool Pro Stitch Master Manual Book Download Page 45

Page: 45 / 47

Stitch Master Specifications

Max. Sewing

Speed

Stitch-by-Stitch up to 412

stitches/minute

Shuttle

Oscillating (Cam/Rocker Arm

Driven)

Max. Straight

Stitch Length

6mm

Needle Bar Stroke

34mm

Needle System

135 x 17, 135 x 16

Bed Size

14.5" x 7"

Underarm Space

7" x 4.5"

Presser Foot Lift

3/8" (0.375

)

Bobbin Size

Class 15/ Style A (20.5mm

Dia. x 10.8mm H)

Needle Size Range

#10-22

Thread Range

Home Sizes to V-92 (T-90)

Voltage

110-120V or 220-240V (check

motor to confirm voltage)

H.P.

0.75

Power

550W

Power

Consumption

4.5 amps

Motor RPM

4,500

Speed Control

Digital

Motor Dimensions

(Bracket Included)

9.75" L x 9" H x 6" W

Workhorse™ Servo Motor Error Codes

ERROR CODE ( WILL SHOW

ON LED DISPL AY )

SOLUTION

“E1”: Operational failure

Machine is locked. Check to see if the machine

is difficult to turn by hand with the Power Plus™

Flywheel. Remove material and attempt to operate,

if it works, material was too heavy for motor.

“E2”: Over current or under voltage

Check the power source to ensure that the motor

voltage matches the outlet voltage.

“E3”: The board cannot read the parameter.

Turn the power off and on twice, and try again. If the

problem still occurs, contact Sailrite

“E4”: Hall signal error

Replace the main fuse. To do this, turn off and

unplug the motor, remove the front external plastic

cover and replace the main fuse with one of the

extras sent with the motor. If the problem continues

to persist, please contact Sailrite.

“E5”: Needle position problem

1. Press and release the “S” button and the LED

display will change to “P.”

2. Press the “P” button 2 times and the display will

changes to “n1.”

3. Press the “S” button and the display will change

to “1.”

4. Press the “S” button again and the display will

change to “0” (disable needle positioner).

5. Press the “P” button to save the value.
6. Turn the power off and then on again to complete

the programming.

Stitch Master

Guidebook: Specifications

Summary of Contents for Craftool Pro Stitch Master
















































Search results

Summary of Contents for Craftool Pro Stitch Master

Reviews:

Related manuals for Craftool Pro Stitch Master

Brands by name

Popular brands

Sailrite Craftool Pro Stitch Master, Manual Book

Search results

Summary of Contents for Craftool Pro Stitch Master

Reviews:

Related manuals for Craftool Pro Stitch Master

Brands by name

Popular brands