Work Environment for Workhorse™ Servo Motor
1.
Power Voltage: Do not use any Voltage
but the one specified on the motor.
2.
Electromagnetic Pulse Interference: Keep
the motor away from high electromagnetic
machinery and electro pulse generators.
3.
Temperature:
a.
Do not operate in temperatures above
115°F (46°C) or under 40°F (4°C).
b.
Avoid operating in direct sunlight.
c.
Avoid operating near a heater.
d.
Avoid operating in areas with low and
high humidity.
4.
Atmosphere:
a.
Avoid operating in dusty areas.
b.
Avoid operating near combustible or
flammable items.
c.
Avoid water coming into contact with
the motor/outlet.
5.
Power Cord:
a.
Avoid placing heavy objects, excessive
force or bends in the power cord.
b.
Ensure the power cord cannot be
caught in the timing belt.
c.
Check that the outlet voltage matches
the motor voltage before plugging in the
power cord.
• Mallet or Hammer
• 3/8 inch Socket Wrench
• 14 mm Socket Wrench
• Crescent Wrench
• #2 Phillips Screwdriver
• #1 Stubby Phillips Screwdriver
• Flat Screwdriver (included)
• Box End Wrench (included)
• Tape Measure
• A Triangle or Square
Basic tools required:
Assembling the Stitch Master
WARNING:
This product can expose you to chemicals including Nickel (Metallic),
which is known to the State of California to cause cancer. For more information
go to www.P65Warnings.ca.gov.
WARNING: CHOKING HAZARD:
Small parts. Not for children under 3 years. CONTAINS
FUNCTIONAL SHARP POINT. Adult supervision recommended.
Stitch Master
®
Guidebook: Safety
4
3