New Wind di Roberto Spata & C.
– Via V. Veneto, 2 – 22079 Villa Guardia (CO)
New Wind di Roberto Spata & C.
– Via V. Veneto, 2 – 22079 Villa Guardia (CO)
Tel. / Fax +39 031 563954, cell. +39 335 6645553 – e-mail:
Tel. / Fax +39 031 563954, cell. +39 335 6645553 – e-mail:
http://
www.nwind.it
- http://
www.sailbrain.it
http://
www.nwind.it
- http://
www.sailbrain.it
28
• The screen shown in Picture 2.11 will be displayed as Windows XP
copies the required driver files.
Pic. 2.11
• Windows should then display a message indicating that the installation
was successful (Picture 2.12). Click "Finish" to complete the installation
for the first port of the device.
Pic. 2.12
• If the device is based on the FT2232, the second port must also be
installed. The procedure for installing the second port is identical to that
for installing the first port from the first screen of the
Found New Hardware Wizard for the USB Serial Port device. If the driver
is Microsoft WHQL certified, this is done automatically.
• Open the Device Manager (located in "Control Panel\System" then
select the "Hardware" tab and click "Device Manger") and select "View >
Devices by Connection", the device appears as a "USB Serial Converter"
with an additional COM port with the label "USB Serial Port" (Picture
2.13). If the device is based on the FT2232, two ports will be available
from a composite USB device.
Pic. 2.13
• In the case of the FT2232, port A of the FT2232 will be installed as
COMX and port B will be installed as COMX+1 where COMX is the first
available COM port number.