New Wind di Roberto Spata & C.
– Via V. Veneto, 2 – 22079 Villa Guardia (CO)
New Wind di Roberto Spata & C.
– Via V. Veneto, 2 – 22079 Villa Guardia (CO)
Tel. / Fax +39 031 563954, cell. +39 335 6645553 – e-mail:
Tel. / Fax +39 031 563954, cell. +39 335 6645553 – e-mail:
http://
www.nwind.it
- http://
www.sailbrain.it
http://
www.nwind.it
- http://
www.sailbrain.it
26
• If Windows XP is configured to warn when unsigned (non-WHQL
certified) drivers are about to be installed, the message dialogue shown in
Picture 2.4 will be displayed unless installing a Microsoft WHQL certified
driver. Click on "Continue Anyway" to continue with the installation. If
Windows XP is configured to ignore file signature warnings, no message
will appear.
Pic. 2.4
• The screen shown in the next picture will be displayed as Windows XP
copies the required driver files.
Pic. 2.5
• Windows should then display a message indicating that the installation
was successful Click "Finish" to complete the installation for the first port
of the device.
Pic. 2.6
• If the device is based on the FT2232, the Found New Hardware Wizard
will continue by installing the USB Serial Converter driver for the second
port of the FT2232 device. The procedure for installing the second port is
identical to that for installing the first port from the first screen of the
Found New Hardware Wizard. This is done automatically if the driver is
Microsoft WHQL certified. If the device is not based on the FT2232, the
COM port emulation driver is loaded as indicated in the following steps.
• The Found New Hardware Wizard will launch automatically to install the
COM port emulation drivers. As above, select "No, not this time" From the
options and click "Next" to proceed with the installation (Picture 2.7).
