16
Copyright. Sygnal 2018
Figure 20 – Mode change
screen – in Temperature
sensing mode
Figure 21 – Mode
change screen –
in Flow Set.
Figure 19 – Navigator in
the Zone mode screen
Figure 22 – Flow Set Mode
– use UP/DOWN arrows to
change the airflow.
5.1.5 Changing the Temperature in a Zone
Once you are on the zone page you wish to adjust, use the UP arrows to adjust the temperature up and the
DOWN arrow to adjust the temperature down.
5.1.6 Changing the Mode in a Zone
The Climatepoint system is designed to work most efficiently in the temperature sensing mode. In
Temperature sensing mode (Figure 20), the airflow automatically adjusts according to the information being
fed back by the temperature sensor in the zone. As an additional feature, there is a “Flow” set mode (Figure
21) for each zone. “Flow” set mode will allow you to adjust the airflow to the zone, but will not work off the
temperature sensor if “Flow” is engaged. To change the mode in a zone press the “set” button then use the up
or down arrows, this will change the mode from “TEMP” to “FLOW” you will notice the setpoint will change to
position. To change the percentage of airflow from 0% - 100%, press “Set” again to return the zone screen
(Figure 22) and use the up and down arrows to move the percentage between 100% (open) and 0 % (closed).
