12
Copyright. Sygnal 2018
Figure 15 – Global Time schedules page is launched. Set on/off events for the whole system from the Overview page or individual events
can be set from the home page.
brochure.
4.6 Leaving Global Time Schedules Page
Press the “Hide Show” button at the top right of the page and this will take you back in to the Overview
Screen. (Figure 15 – Blue Arrow)
4.7 Accessing Individual Zone
Press on the Select Zone Button. This will drop down a list of the zones in your home or premises (Figure 15 –
Orange Arrow). Then press on the zone name you wish to access and it will launch the User Interface page for
that zone. (Figure 15 - Green Arrow)
4.8 Return to Overview page
Press the overview button.
4.9 Browse to other systems
If you have multiple Sygnal Air Conditioning or Lighting systems, use the “Other Systems” button to browse to
them. Simply select the system you wish to interact with from the drop down list.
4.10 Adjusting the settings on a Zone
Use the slider bar to adjust the temperature set point within the zone (Figure 16 – Yellow Arrow). To use the
system most efficiently, we recommend a set point between 20 and 24 degrees for each zone and the zone to
be left in “Temperature Control” mode. To change the mode to “Airflow Control” (disables the temperature
sensor and delivers the maximum airflow specified for the zone at 100%) press on the “Airflow Control” button
(Figure 16 Red Arrow). In Airflow Control mode, you can use the slider bar to adjust the percentage of air being
delivered between 0-100%.
