IT IS NECESSARY TO READ THIS INSTRUCTION MANUAL CAREFULLY TO KNOW THE
SPECIFICATIONS OF THE DISPENSER. AS ALL MECHANICAL PRODUCTS, THIS UNIT REQUIRES
CLEANING AND MAINTENANCE. ITS WORKING ORDER CAN BE COMPROMISED BY POSSIBLE
ERRORS MADE BY THE OPERATOR DURING DISASSEMBLY AND CLEANING. FOR THIS REASON IT
IS IMPORTANT THAT THE STAFF IN CHARGE OF THE DISPENSER IS QUALIFIED TO CARRY OUT THE
DAY TO DAY OPERATIONS, WHICH ARE DISMANTLING, CLEANING, STERILIZATION AND
REASSEMBLY.
Page 3
OPERATING PROCEDURES
SET-UP:
• Remove the dispenser from the packaging (save in case of returns, etc.).
• Check for shipping damage (if any, please contact us immediately).
• The dispenser does not leave the factory sanitized. Prior to use it must be disassembled,
• Place the dispenser on a level counter top that will support up to 20 lbs.
• Before connecting the dispenser electrically check that the voltage is as shown on Pg. 2.
READY TO USE:
• The Dispenser has a general power switch that operates in two functions
a. Position 0: Power is off
b. Position | : Heat and motor is on
• The dispenser is equipped with a primary thermostat on the right side to adjust the
IMPORTANT NOTE:
The dispenser is equipped with a secondary thermostat on the underside to override the
side thermostat (scald control). This is initially set to 120 degrees Celsius. Changing
this setting can alter the heating time for your product. We suggest leaving this at the max
setting.
cleaned and sanitized.
Plug the unit into a grounded, protected single phase electrical supply.
Do not use extension cords to connect the unit electrically.
temperature of the product.
