Sagitter SG H1500, User Manual

Page: 19 / 24

19
5.3 – TIMER MODE
Through the main menu it’s possible to manually set the main settings of the machine (par.
5.1 – Menu). After setting the desired parameters it’s enough to confirm them by pressing
the “SET” button on the keypad; then pressing the button “TIMER” the unit will start the
Timer mode and continue cyclically as previously set. To stop the smoke emission it’s needed
to press the “SET” button.
5.4 – MANUAL MODE
From the main menu, by pressing the “START” button, the unit automatically begins the
smoke emission. It’s possible to adjust the smoke quantity and the fan speed going to change
the parameters “P” (amount of smoke) and “F” (fan speed) through the FUNC/ESC button
and UP/DOWN button to increase or decrease the values.
6. - MAINTENANCE
To ensure optimal performance, the unit must be frequently cleaned. Unplug the device
from the mains and let it cool for at least 8 hours to avoid the risk of burns. Use a vacuum
cleaner or an air compressor and a soft brush to remove the dust deposited.
Any damaged part must be replaced with original spare parts.
SPECIAL WARNINGS AUTO CLEANING FUNCTION:
Before to switch off the machine, press SET button. The display will show
“Do not POWER off
in clean after 300sec” . With this function the machine starts a process of auto cleaning for
300 seconds. After this time the display will show “To turn off the power”. The machine is
cleaned and you can turn off.