Sagitter SG H1500, User Manual, Page: 17 / 24

17
4. - INSTALLATION AND SWITCH ON
4.1 – SMOKE MACHINE INSTALLATION
The smoke machine can be installed
on the floor resting on the special
rubber base feet LAWAYS in a level
position, can not be tilted or upside
down. It’s not possible to install the
device on the wall, ceiling or on a
truss.
WARNING!
Except when the device is placed on the floor, the safety rope (PLH200 sold
separately) is always required.
4.2 - CONNECTION TO THE MAINS
The device must be connected to a power supply system with a proper earth system.
Moreover, it is recommended to protect power supply lines of the products from indirect
contact and / or shorting to earth by using appropriately sized anti electrical shock switch.
The electrical connection must be carried out by a qualified electrician. Ensure that the
mains frequency and voltage correspond to those for which the device is designed, as shown
in the electrical data label.