1-Free Sagemcom - Modification with the authorization of the management concerned
– This docu-
ment and the information it contains is the property of Sagemcom
3000499643-R11-000-01
Page 15
UM User Manual (EN) rev. 3.2
Sealing
Casing inner seals
The integrity and the inviolability of the meter are ensured by the internal clipping seals and a lead
seal (see position in the Figure 1)
Figure 4
– Example of internal casing seal
The sealing is done by the factory as shown on the above picture. Any tampering suppose destruction
of the the sealing clip and surrounding of the packaging.
Screw cover seal
The integrity and the inviolability of the attachment of the meter can be ensured by one sealable
threading screw. See position in the Figure 1.
Meter connection to water pipes
The water meter is screwed on the water source and distribution pipes using the threading (see the
Figure 1)
Installation of seal over the water source screw is described in above section.
Name plate
The laser marking is only applied on the top cover of the meter.
It is precise, durable, legible and permanent. It is applied without mechanical constraints and without
contact.
The name-plate of every meter contains all information required by FCC
and additional information. It
can be seen below:
