1-Free Sagemcom - Modification with the authorization of the management concerned
– This docu-
ment and the information it contains is the property of Sagemcom
3000499643-R11-000-01
Page 25
UM User Manual (EN) rev. 3.2
6.
DISPLAY FEATURES AND FUNCTIONS
The product use the LCD to show information concerning the status of the meter, of the communica-
tion and, not the least, all information concerning the End-Consumer consumptions.
User interface
The display remains ON all the time.
The user can access different screens on the display by using the front panel button. Different usages
of the button are defined depending on the push & release duration:
•
Short Press (SP) : the button is pressed and released during 1.2 seconds or less
•
Long Press (LP) : the button is pressed and released in more than 1.2 seconds
•
Quick double press (DP) on button (less than 0.7s)
Display layout
The fully active LCD display of the product is depicted in Figure 6Figure 6.
Figure 6
– LCD display layout.
Table 5: LCD display symbols and meaning.
Icon
Description
In order to identify all the metrological information, this symbol is visi-
ble. When this symbol is off, it depicts an informative data from applica-
tion SW part.
In case of a error , the product displays this symbol
This symbol defines the normal flow direction into the product. It is
blinking during water flow.
Whenever a reverse flow is detected, this symbol is active.
The antenna symbol when blinking depicts the on-going locking on the
network.
Once fixed (non blinking), it indicates the normal function of the radio.
The 2 level symbol defines the amongt of radio signal received by the
product and thus indicates the link quality. With one bar, the radio sig-
nal is correct but low. With 2 bars, the radio link is perfect. When no
bar, it means the link quality is too bad to be used.