RTI90-320/500 T2 HD UK
53
Appe
nd
ix
11. Troubleshooting
Using the receiver
Symptom
Action
The remote control is not
working.
•
Point the remote control at the receiver.
•
Check the battery life and check the batteries are inserted
properly.
The receiver display shows no
information (no time, no channel
number, etc.).
•
Switch the receiver on by pressing the On/Off button.
•
Check all the connections (see section
Connecting your
devices
, page 13).
The receiver displays - -: - - in
standby mode.
•
Take the receiver out of standby mode by pressing the
key.
•
Check that the antenna signal is correctly detected (see
section
Antenna Signal Information
, page 51).
The receiver displays a black
screen or an error message.
•
Check that the antenna signal is correctly detected (see
section
Antenna Signal Information
, page 51).
•
Search for programmes (see section
Searching for channels
,
page 48).
The picture is frozen ./ unclear.
•
Check all the connections, check the antenna and search for
programmes again (see section
Searching for channels
,
page 48).
The receiver cannot find any
channels.
•
Check the antenna reception (see section
Antenna Signal
Information
, page 51).
•
Search for programmes (see section
Searching for channels
,
page 48).
•
Contact your antenna installer/dealer for more information on
your antenna installation.
The TV set does not switch to the
receiver when it leaves standby
mode.
•
Check that your TV set is correctly connected to your receiver
(see section
Connection to the TV set
, page 15).
•
Select the appropriate input on your TV set.
There is no sound in HOME
CINEMA mode on some
channels.
•
Check that the receiver is connected to a Home Theatre
amplifier with a digital link (see section
Connection to a home
theatre system
, page 18).
Black and white video on
TV/AUX output (during VCR/DVD
recording).
•
Check that the signal type chosen for TV/AUX SCART output
is compatible with your VCR (select PAL on VCR, see section
Picture settings
, page 49).
I cannot channel-surf between all
my channels during a double
recording.
•
In the case of a double simultaneous recording, you can only
channel-surf between a restricted number of channels. You will
be able to channel-surf between all your channels again when
at least one of the recordings ends.
LU 253335051-B RTI90-320_500 T2 HD UK.book Page 53 Jeudi, 13. octobre 2011 2:50 14
