![Sagem myC5-2m Technical Documentation Manual Download Page 72](http://html1.mh-extra.com/html/sagem/myc5-2m/myc5-2m_technical-documentation-manual_3543412072.webp)
Proc Sheet 1 08
myC5-2v, myC5-2m
5HPRYHDQG3ODFH
PHWDOGRPH
1/1
7RROV
-
Tweezers.
-
Soldering iron.
-
Gloves.
-
Boxwood stick.
-
Metal dome positioning fixture PN
1%66(
6$*(0
3UHOLPLQDU\RSHUDWLRQ
1. Remove the battery (
Proc Sheet 0 01
).
2. Remove mobile lower housing (
Proc Sheet 1 01
).
3. Remove the volume control key (
Proc Sheet 1 22
).
4. Remove equipped electronic board (
Proc Sheet1 18
).
5HPRYDOSURFHGXUH
This procedure must be performed by a technician with gloves to avoid any risk.
1. Take the metal dome ( 1 ) with the boxwood stick paying attention not to break any component.
2. Remove the metal dome ( 2 ).
3ODFHPHQWSURFpGXUH
:DUQLQJ
7KHPHWDOGRPHLVQRWUHXVDEOHLWPXVWEHUHSODFHGE\DQHZPHWDOGRPHXQOHVVWKH
ERDUGLVVZDSSHGDQGVHQWDVOHYHO
1. Stick a new metal dome ( 1 ) on the MMI II ( 2 ) using the metal dome positioning fixture.
)XUWKHURSHUDWLRQ
1. Place equipped electronic board (
Proc Sheet1 18
).
2. Place the volume control key (
Proc Sheet 1 22
).
3. Place mobile lower housing (
Proc Sheet 1 01
).
4. Place the battery (
Proc Sheet 0 01
).
Risk of the procedure :
•
Damage the FPC connector.
•
Damage the lateral key.
•
Damage the components of the MMI II..
1
2
Procedure
Symptom
Test
REF MTB DTS 1- Indice A - December 16 2005
Page 5-12