Proc Sheet 1 06
myC5-2v, myC5-2m
5HPRYHDQG3ODFH
0RELOHORZHUKRXVLQJFRQGXFWLYHIRDP
1/1
7RROV
-
Gloves.
-
Plectrum.
-
Upper housing fixture myC5-2 of PN SAGEM
Identification
3UHOLPLQDU\RSHUDWLRQ
1. Remove the battery (
Proc Sheet 0 01
).
2. Remove the lower casing of mobile (
Proc Sheet 1 01
).
5HPRYDOSURFHGXUH
1. Remove the MMI II using the plectrum ( 1 ).
2. Remove the MMI II from it flat ( 2 ).
3. Remove the conductive foam ( 3 ).
3ODFHPHQWSURFHGXUH
1. Place the keypad in it place ( 2 ).
2. Re place the MMI II in it place ( 1 ).
3. Place the conductive foam in their place ( 3 ).
)XUWKHURSHUDWLRQ
1. Place mobile lower housing (
Proc Sheet 1 01
).
2. Place the battery (
Proc Sheet 0 01
).
Conductive
Foam
Risk of the procedure :
•
Damage the numeric keypad.
•
Damage the FPC LCD.
Procedure
Symptom
Test
REF MTB DTS 1- Indice A - December 16 2005
Page 5-11