6-16
Maintenance
Date en cours : 22 mai 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23261430-5 36xx Sagem GB\Maintenance.fm
composed of several pages, the transmission will take place from the page where the error
occurred.
• abandoning the transmission by deleting the corresponding command in the transmission line
(refer to paragraph Deleting a transmission on hold, page 5/8).
The fax machine makes at most 5 automatic redials.
Message
G
IVE
U
P
D
IALING
:
This message is displayed when transmission failed 12 times in a row. All the documents on hold
for transmission are then automatically cleared from the memory of the fax machine. To clear the
message
G
IVE
U
P
D
IALING
from the screen, press
.
&RPPXQLFDWLRQHUURUFRGHV
The communication error codes appear in the logs and transmission reports.
*HQHUDOFRGHV
Code 01 - Busy or no fax answer
This code appears after 6 unsatisfactory attempts. Call later.
Code 02 - Burnt number
A number is burnt after 6 unsatisfactory transmission attempts. No recall is possible. You have to
validate the subscriber’s number a second time: refer to his record in the directory.
Code 03 - User break
A communication has been stopped by the user pressing the key
.
Code 04 - Non programmed number
A number saved as a one-touch key or abbreviated number is not valid: check it. (Example: a
delayed transmission was programmed with a one-touch key and this key has been deleted in the
meantime).
Code 05 - Scanning default
An incident occurred at the place where the document is placed to be scanned, for example, the
sheet is jammed.
Code 06 - Printer default
An incident occurred in the printer part: no paper, paper jam, opened cover. In the reception mode,
this incident appears only if the reception parameter no paper is switched to
W
ITHOUT
P
APER
(refer
to paragraph Reception without paper, page 3/5).
Code 07 - Disconnected
The link has been cut (bad line). Check the call number.
Code 08 - Quality
The doucment you sent was badly received. Contact your subscriber to know if it must be sent
again. The disturbance may have occurred in an unimportant part of the document.
Code 0A - No document to be polled
You tried to poll a document from a subscriber who had not prepared his document (no deposit) or
the password entered was incorrect.
Code 0B - Wrong number of pages
There is a difference between the number of pages indicated during preparation for the
transmission and the number of pages sent: check the number of pages in the document.
LIASSE 23261430-5.book Page 16 Mardi, 22. mai 2001 1:35 13