Sagem MF 3610 SMS, User Manual

Page: 21 / 108

Installation
1-13
Op
eration
Set
ting
s
Quick usage
Directory
M
a
intenance
Safety
Contents
Inst
all
a
tio
n
Date en cours : 7 mai 2003
\\Sct31nt3\BE31-DOC\DOC 31 - En cours\Travaux en cours\MFL-MFC-MFK\MFC 251274544A_LU MF3610-3620
SMS_Sagem_GB\Installation.fm
.
+
Make sure that the power switch is in the I (On) position.
Caution -
Plug only the power pack supplied with your machine into the port (A) by means of
the main power cord (2).
7
(/(3+21( $1'
/$1
&211(&7,21
+
Plug end of the telephone line (4) into its jack on the fax machine (E), and the other end
into the wall telephone socket.
+
Plug end of the LAN cord (as provided by your network administrator) into port (H) of
your fax machine and the other end into your local network port dedicated to your fax
machine.
3
2:(5 /,1( &211(&7,21 $1' 6:,7&+ 21
Caution -
Refer to safety procedures in the Safety Chapter.
+
Plug end of the main power cord (1) into the jack of the fax (B), and the other end in the
wall outlet
+
Set the switch (G) (depending on model) to position 1 (On).
After a few seconds, when the printer has warmed up, the date and time will appear.
8
3'$7,1* 7+( &21680$%/(6
A chip card is delivered with the consumables. This card is used to initialise the system. You can
then check the status of the consumables (toner, drum) at any time.
After installing all the consumables in the printer, you need to inform the machine about their
features.
LIASSE 251274544A.book Page 13 Mercredi, 7. mai 2003 4:01 16