Sagem MF 3505, User Manual

Page: 45 / 109

Setting your machine
3-9
M
ESSAGE SERVICE AND THE
I
NTERNET
(
MODEL
B)
Your terminal lets you send and receive documents and E-mails from subscribers throughout the
world over the Internet.
An E-mail is an electronic message sent over the Internet, to an E-mail address (which is a
personal Internet mailbox).
Before worldwide transmission, you must:
• check that all initialisation parameters correspond to those provided by your ISP,
• perform the proper settings , if needed, for the Internet connection.
You may then connect yourself to the Internet to send and receive fax-Internet or E-mails. Both
operations will be performed during a connection.
I
NITIALISATION PARAMETERS
You must define or, at least check all parameters needed to identify yourself on the local
network.
Your ISP will provide you with these parameters as soon as you are registered with them.
The parameters are divided in three categories:
• message service , allows you to define the message service identifier, the message service
password and the E-Mail address,
• servers , allows you to identify the name of the OP address of Internet SMTP providers
(send) and POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The server
address is made up of 4 groups of 3 digits maximum, separated by dots.
• SMTP Authentification , used to activate the authentification protocol when the SMTP ser-
ver used requests this to end e-mails.
Access to connection and message service parameters
91 OK - INTERNET / SUPPLIER
Select
LOCAL NETWORK
to show the connection parameters and validate by pressing the
OK key.
Choosing
NO ACCESS
disables access to Internet functions. OK .
921 OK - INTERNET / INIT. PROVIDER / MESS. SERV
Enter Email
IDENTIFIER
, press OK .
Enter Email
PASSWORD
, press OK .
Enter
E-MAIL ADR
, press
OK
.