Sagem MF 3505, User Manual

Page: 40 / 109

3-4
Setting your machine
T
ECHNICAL PARAMETERS
As delivered your fax is preset by default. However, you may adjust it to meet your requirements by
resetting the technical parameters.
To set the technical parameters:
29 OK - SETUP / TECHNICALS
Select the desired parameter and confirm with OK .
With the keys or , modify the parameter settings by following the table below and
press OK .
Parameter Setting Model Signification
1 -
SCANNING
MODE
1 - NORMAL
2 - FINE
3 - SFINE
4 - PHOTO A AND B
Default value of the scan mode resolution for
the documents to be transmitted.
8 - ECO
ENERGY 1 - WITHOUT
2 - DELAY
5 MIN
3 - DELAY
15 MIN
4 - DELAY
30 MIN
5 - STDBY
PERIOD A AND B Choosing the printer standby delay: the printer
will switch to standby after a delay (in minutes)
of NON-operation or during the period of time
of your choice.
10 - RX
HEADER
1 - WITH
2 - WITHOUT B If this parameter is on, all documents received
by your fax will include the subscriber’s
header with his name, number (if available) fax
print date and the page number.
74 - ERASE
MAILBOX
1 - WITH B
When the fax machine receives an e-mail with
an attachment and cannot open it, it erases the
message from the ISP MBX, prints and
transmits with a notice of uncomprehension to
the message sender.
2 - WITHOUT B At E-mail reception, the fax does not destroy
the MBX message, it prints a
notice of
uncomprehension asking you to recuperate
this message with your computer equipment.
This parameter is useful only if you have
PC equipment. The memory capacity is
limited, you need to empty your MBX or else
new messages may not be received.