Sagem D50T, User Manual

Page: 59 / 84

55
Select ADVANCED SET. using or . Press Valid .
Select SET BASE using or . Press Valid .
Select REGISTR.MODE using or . Press Valid .
A screen prompts you to confirm the setting of the base to the registration
mode. Press Yes to enter the registration mode. The indicator light on
your base starts to quickly blink green.
You base will remain in registration mode for about 1 minute.
Re-initialising the base
When you re-initialise your base, all the base parameters are reset to their
initial values (factory settings), your SMS are not deleted.
On the navigator key , press or until the SETTINGS screen is
displayed, press OK to confirm.
Select ADVANCED SET. using or . Press Valid .
Select SET BASE using or . Press Valid .
Select RESET BASE using or . Press Valid .
A confirmation screen will prompt you to confirm your request:
• To re-initialise the base, press Yes .
• If you do not wish to re-initialise the base, press No .
Enter the base code using the keypad. Press Valid .
You can also use the base buttons to put the base in registration
mode:
•
If your base is equipped with an answering machine: Press
simultaneously on the two top buttons on the base for a few
seconds .
• If your base is not equipped with an answering machine:
Press on the button on the base for a few seconds.
Return
Valid
SET BASE
Return Valid
REGISTR. MODE
No Yes
REGISTR. MODE?
Return Valid
SET BASE
Return Valid
RESET BASE
No
Yes
RESET BASE ?
R
S
ETTINGS
Livre du MD+.book Page 55 Mardi, 30. mars 2004 4:38 16