Sagem D50T, User Manual

Page: 58 / 84

54
The handset enters the registration mode, "HANDSET IN REGISTR.
MODE" is displayed on the screen.
Put the base to which you want to register the handset in registration
mode.
Once the handset is registered, select the required handset number. Press
Valid .
On the base:
Put the base to which you want to register the handset in registration
mode:
•
If your base is equipped with an answering machine: Press
simultaneously on the two top buttons on the base for a few seconds
.
• If your base is not equipped with an answering machine: Press on the
button on the base for a few seconds.
The green light blinks rapidly, the base is in registration mode.
The new handset and the base are mutually searching for each other. The
registration may take several seconds.
Once the handset is registered, the handset automatically exits the
registration mode et lets you know the registration is done.
A
DVANCED SETTINGS
/ B
ASE SETTINGS
Using a handset to put the base in registration mode
This function enables you to put the base in registration mode so you can
register a new handset. To do so, the handset to be registered must be in
registration mode (Refer to paragraph Registering a new handset to a
base, page 51).
On the navigator key , press or until the SETTINGS screen is
displayed, press OK to confirm.
You can also set your base to the registration mode using a
handset already registered by selecting the Registration function
in the menu SETTINGS/ADVENCED SET/SET BASE.
Return Valid
HANDSET 2
S
ETTINGS
Livre du MD+.book Page 54 Mardi, 30. mars 2004 4:38 16