9
Y
OUR
TELEPHONE
Model with answering machine (D30V):
Place the base where it should be located,
click in the telephone jack in its socket (as
shown on the drawing) and connect the other
end of the lead to the wall telephone socket.
Connect the end of the mains power unit lead
to the bottom of the base and the mains
power unit to the mains socket. The mains on
indicator located on the base comes on
green.
Route the wires in the guides and put the
base where it should be.
Handset set-up
Insert the batteries one after the other in
compliance with the battery polarity, as
shown on the label in the handset. Place the
cover back on the handset by pushing
upwards until it is completely closed.
Remove the protective film on the screen,
place the handset on the base to fully charge
the batteries.
The charging icon appears on the screen, it
indicates the charging status. Once the icon
is full, your batteries are charged.
Only use certified rechargeable batteries. For optimal battery charge, leave the
handset on the base for at least 12 hours during initial use. During charging, the
batteries may heat up, this is quite normal and without risk.
Power socket
Telephone socket
LU 252973993 D30 T V H Australie.book Page 9 Mercredi, 20. juin 2007 9:47 09
