Sagem D30V User Manual Download Page 23

Page: 23 / 64

SMS

SERVICE

•

If the information is accurate. Press

Confirm

. A message appears on the

screen indicating that the transmission of
your SMS is in progress.

•

To change the phone number, edit or
modify your text message, press Modify .

Press

Edit

At the end of the transmission, you can save
a copy of your message. It will be stored in
the

Sent

SMS folder.

•

To save the message, press

Yes

•

If you do not want to save the message,

press

In the event of a delivery failure

An information screen appears indicating
that your service provider was unable to
deliver your message.

Press

CONT.

Different options come up on the screen:
-

SAVE

: to save your text in draft form. Once

it is saved, you will be able to resolve the
potential problems and send your
message at a later time without having to
enter it again.

TRY AGAIN

: to attempt a new delivery.

DELETE SMS

: to permanently delete your

SMS.

SEE RECEIVER

: to check the phone

number or send the SMS again.

EDIT

: to change the delivery type and

number or your text.

Choose an action using

. Press

Valid.

Reading a message

Your telephone has 4 different folders in
which your SMS messages are stored.

NEW

: contains the unread messages.

INBOX

: contains the read messages that

you have chosen to keep.

SENT

: contains the copies of sent

messages that you saved.

DRAFT

: contains the messages that you

wrote and that have not been sent out.

On the navigator key

, press

until the

SMS

menu is displayed, press

confirm.

Select

READ SMS

using

. Press

Valid.

Select a send box, press

Valid.

Enter the code of the box, if you have

selected a personal box. Press

Valid.

A list of the different folders appears. The
number of messages contained in each
folder is displayed in brackets.

If no personal box has been created,
only the shared box is displayed on
the screen.

To create a personal box, select
PersoBox Menu and press

Valid.

. Follow the instructions

displayed on the screen. For further
details, refer to the paragraph

Creating a personal box

, page

LU 252973993 D30 T V H Australie.book Page 23 Mercredi, 20. juin 2007 9:47 09

Summary of Contents for D30V

































































Search results

Summary of Contents for D30V

Reviews:

Related manuals for D30V

Brands by name

Popular brands

Sagem D30V, User Manual

Search results

Summary of Contents for D30V

Reviews:

Related manuals for D30V

Brands by name

Popular brands