35
A
CCESSORIES
Monitoring a room
Two handsets must be registred on the same
base to use this function. You can use your
handset to monitor a room. This allows you,
for example, to monitor a baby's room.
To do so, place one of the handsets in the
room to be monitored. This unit will be in
"sender" mode.
The other handset will remain with you, it is in
"receiver" mode.
On the receiver handset:
On the navigator key
, press
or
until the
ACCESSORIES
screen is
displayed, press
OK
to confirm.
Select
ROOM MONITOR.
using
or
.
Press
Valid.
.
Select the sender handset using
or
.
Press
Call
.
The sender handset rings, pick up using the
green key
.
On the transmitter handset:
A screen invites you to activate the monitor
mode (sender mode). Press
Yes
.
Both handsets are now in monitor mode.
•
Place the sender handset in the room to
be monitored.
The handset in sender mode does
not ring to notify you of incoming
calls. It can therefore be placed in a
room where someone is sleeping.
•
Keep the receiver handset with you.
To stop monitoring:
- Press
Stop
on the transmitter set. The
receiver set will automatically return to the
standby screen.
- Press
Stop
on the receiver set and
confirm by pressing
Yes
and
Stop
on the transmitter handset at the same
time.
When in monitor mode, the receiver
handset can be used to make calls.
To make a call: press
Call
and
dial the number.
To answer a call: press green
key
.
At the end of the call, the handset
will automatically return in monitor
mode.
LU 252973993 D30 T V H Australie.book Page 35 Mercredi, 20. juin 2007 9:47 09
