Sagem D16T, User Manual

Page: 111 / 132

English
- 2 -
2. Before you begin
Make sure your package includes the items:
1. Base unit,
2. Handset,
3. One battery compartment cover,
4. Handset
battery,
5. Telephone line cord,
6. AC power supply,
7. This user guide.
In the case of purchasing a pack duo or trio, you will find in addition for each additional handset:
1. A
handset charger,
2. An additional battery flap,
3. One battery compartment cover.
2.1.
Digital security system
Your cordless phone uses a security system to provide protection against false ringing,
unauthorised access and charges to your phone line.
When you place the handset in the base, the unit verifies its security code. After a power outage
or battery replacement, you should place the handset in the base for about 20 seconds to reset
the code.
2.2.
Installing the phone
Power socket
telephone socket
Bloc battery
2.4V 550mAh
Battery wire
1. Remove the battery compartment door of handset.
2. Insert battery pack and connect the cord from left direction into the jack inside the handset.
3. Put the compartment door back on. «
searching
..» appears on the screen.
4. Plug the power supply cord into AC outlet and the other end into the power jack on the base
bottom.
5. A welcome message in all the languages supported by the telephone is displayed on the
screen, press
*
.
6. Select the country using or keys, press
*
.
7. A screen asks you to confirm your choice. Press .
You will hear a confirmation tone.
8. The screen saver is displayed.
*
: depending on country
LU EN final.fm Page 2 Mardi, 23. juin 2009 10:39 10