Setting your machine
3-5
Transmission report
You may print a
transmission report
for all communications over the telephone network (STN).
You may choose between more than one criteria for printing reports:
•
WITH
: a report is given when the transmission was properly performed or when it is comple-
tely abandoned (but there is only one report per request),
•
WITHOUT
: no transmission report, however, your fax will note all transmissions that took
place in its log (refer to paragraph
Logs
, page 5-25),
•
ALWAYS
: a report is printed with each transmission,
•
ON ERROR
: a report is printed only if the transmission failed or is abandoned.
With each transmission report from memory, a reduced version of the first page is automatically
reproduced.
To select the report type:
231 OK
-
SETUP
/
SEND
/
SEND REPORT
Select the required option
WITH
,
WITHOUT
,
ALWAYS
or
ON ERROR
and confirm your
choice with
OK
.
Document feed type
You may choose the way you want to feed your documents:
• from
memory
, transmission will take place only after memory storage of the document and
dialling. It allows you to get your originals back quickly to free up the machine.
• from the
feeder of the sheet-feed scanner (
refer to paragraph
Document depositing
,
page 5-1
),
transmission will occur after dialling. It allows transmission of larger documents.
To select the way you want to feed your documents:
232 OK
-
SETUP
/
SEND
/
MEMORY SEND.
Select the option
MEMORY
or
FEEDER
and validate your choice with
OK
.
Remark
:
in feeder mode, the reduced image will not appear on the transmission report.
Economy period
This function allows you to defer a fax transmission to "off-peak hours" and thus reduce the cost
of your communications.
The
economy period
, via the telephone network (at off-peak hours), is preset by default from
7.00 pm to 7.30 am. Nevertheless you may
change this time slot
.
Modifying the economy period:
233 OK
-
SETUP
/
SEND
/
ECO PER.
Enter the hours of the new economy period and confirm your selection with the key
OK
.
Using the economy period:
32 OK
-
FAX
/
ECO TRANS.
Enter the call number and confirm with
OK
.
Summary of Contents for 5690DN
