Sage the Risotto Plus BRC600, Quick Manual

Page: 11 / 24

11
EN
CARE & CLEANING
Unplug the power cord from the power outlet.
Allow all parts to cool before removing the
removable cooking bowl. Wash the removable
cooking bowl, stainless steel steaming tray
and glass lid in hot, soapy water, rinse
and dry thoroughly.
We do not recommend that any parts of your
Risotto Plus
™
are washed in a dishwasher
as harsh detergents and hot water temperatures
may stain or distort the removable cooking
bowl and accessories.
Do not use abrasive cleaners, steel wool,
or metal scouring pads as these can damage
the non-stick surface.
The housing can be wiped over with a damp
cloth and then dried thoroughly.
To prevent damage to appliance do not use
alkaline cleaning agents when cleaning,
use a soft cloth and a mild detergent.
NOTE
If rice has cooked onto the bottom of the
removable cooking bowl, fill the bowl with
hot, soapy water and leave to stand for
approximately 10 minutes before cleaning.
TROUBLESHOOTING
PROBLEM WHAT TO DO
The Risotto Plus
™
suddenly
switches off.
• Ensure power plug is connected properly
to the appliance and to power outlet.
• The appliance has been stressed or
has overheated due to cooking conditions.
Push the desired cooking button and then
the START / CANCEL button to reset and
continue cooking. Allow a few minutes for
appliance to reheat and continue cooking.
The Risotto Plus
™
has switched to
KEEP WARM setting before cooking
is complete.
• Press the START / CANCEL button to
reset. Then, select the desired cooking
method to continue cooking.
WARNING
The appliance connector must be
removed before the Risotto Plus
™
is cleaned and that the appliance
inlet must be dried before the
Risotto Plus
™
is used again.
To prevent damage to the Risotto
Plus
™
do not use alkaline cleaning
agents when cleaning, use a soft
cloth and mild detergent.
Do not use chemicals, steel wool,
metal scouring pad or abrasive
cleaners to clean the outside of the
Risotto Plus
™
housing or cooking
bowl as these can damaged the
housing or the coating of the
cooking bowl.
Do not immerse housing or power
cord in water or any other liquid
as this may cause electrocution.