9
ASSEMBLY
5.
Place the processing lid onto the processing
bowl so the feed chute is slightly right of
the bowl handle and the arrow graphics
are aligned
. Holding the feed chute
and pressing down firmly at the same time,
turn the lid clockwise (as indicated by the
graphic) so the ‘Locking Tab’ on the lid slots
into the ‘Interlocking Safety Catch’ on the
handle. The lid should be securely locked
into position.
NOTE
The food processor will not operate unless
both the processing bowl and lid are
correctly locked into position.
CAUTION
The processing blade
(including the mini bowl blade)
and discs are extremely sharp,
handle with care at all times.
6.
Insert the power plug into a 220–240 volt
power outlet and switch the power outlet on.
7.
At the end of processing, always wait until
the blades or discs have stopped spinning
before unlocking and removing the lid.
To remove the processing lid, ensure the
POWER/OFF button has been pressed, the
power is switched off at the power outlet and
the cord is unplugged from the power outlet.
Holding the feed chute and pressing
down firmly at the same time, turn the lid
anti-clockwise so that the arrow graphics
are no longer aligned.
8.
Remove the processing bowl (before
removing blade or discs) by turning it
anti-clockwise until the handle is in line
with the ALIGN HANDLE. Lift the bowl off
the motor shaft. When removing the discs –
carefully remove by gripping the plastic hub
on the centre of the disc and lifting the disc
up and away from the pin on the spindle.
OVERLOAD PROTECTION SYSTEM
If the motor overloads, the food processor will
go to STANDBY mode and OVERLOAD icon
in the LCD starts to flash. The food processor
can still be switched off by pressing the
POWER/OFF button. To operate the food
processor again, allow the machine to cool
for approx 30 minutes.
Some stiff mixtures, such as dough, may cause
the dough blade to rotate more slowly than normal.
If this happens, do not process for longer than
1 minute.
