7
Assembly
BEFORE FIRST USE
•
Before using your mixer for the first time,
remove packaging material and promotional
labels. Do this while the POWER is off, and
the cord is unplugged.
•
Be careful when handling the blending leg,
blades and discs as they are extremely sharp.
•
Wash the blending leg, processing bowl,
processing lid and all attachments in warm
soapy water with a soft cloth. Rinse and dry
thoroughly.
ATTACHING THE MOTOR BODY
1. Hold the motor body over the blending leg,
masher, whisk, or gear box, as shown below.
Push together until it clicks and locks.
2. To release the motor body, squeeze the
EJECT buttons with thumb and finger as
shown below. Pull the motor body away,
while supporting the part you are releasing
it from.
ASSEMBLING THE
PROCESSING BOWL
1. The spindle must be used with the S-blade,
adjustable slicer, and the fine and coarse
reversible shredder. Failing to use the
spindle will damage the parts, and
incorrect use this way may cause the
parts to fuse together.
2. Position the spindle over the coupling in
the centre of the processing bowl.
3. Place either the S-blade, adjustable slicer,
or the fine and coarse shredder over the
spindle. Blades are extremely sharp -
position them by touching the plastic area
and keeping fingers away from blades
POSITIONING THE SHREDDER
Summary of Contents for the Control Grip All In One
Page 1: ...the Control Grip All In One Instruction Book BSB530UK...
Page 27: ......
