16
9. At the end of the PIZZA cycle, the oven alert
will sound. The START/CANCEL button
backlight will go out and the LCD screen will
illuminate blue.
NOTE
If using the included pizza pan, place it in the oven
during the preheating cycle for the best result.
Carefully place pizza on the heated pizza pan.
A note on pizza stones
When using a pizza stone, it is necessary
to preheat the stone, without a pizza, for
optimum results.
1. Insert the wire rack, with the spokes facing
upward, into the middle rack height position.
2. Place pizza stone on the center of the wire rack
so air will flow around all sides of the stone.
3. Close the door and proceed according to pizza
function instructions.
REHEAT FUNCTION
The REHEAT function is ideal for gently reheating
leftovers without browning or drying them out.
1. Insert the wire rack into a rack position that best
suits the type of food you are reheating.
2. Place food, positioned on the included roasting
pan, pizza pan or other oven-proof dish, on the
center of the wire rack so air will flow around all
sides of the food.
3. Close the oven door.
4. Turn the FUNCTION dial until the indicator on
the LCD screen reaches the REHEAT function.
The top figure on the LCD screen indicates the
preset REHEAT temperature of 165°C while
the bottom figure indicates the preset time of
‘:15 MINS’. The preset CONVECTION setting
will also be displayed.
5. The reheating temperature, time, convection
and frozen settings can be adjusted before or
during the reheating cycle.
a) The reheating temperature is displayed as
the top figure on the LCD screen. Turn the
TEMPERATURE dial to adjust the temperature
from 50°C to a maximum of 230°C.
b) The reheating time is displayed as the bottom
figure on the LCD screen. Turn the TIME dial to
adjust the time up to 2 hours.
6. Press the START/CANCEL button to activate
the REHEAT function. The button backlight will
illuminate red, the oven alert will sound and the
LCD screen will illuminate orange.
7. The timer will be displayed and begin to count
down. The cycle can be stopped at any time by
pressing the START/CANCEL button.
8. At the end of the REHEAT cycle, the oven
alert will sound. The START/CANCEL button
backlight will go out and the LCD screen will
illuminate blue.
WARM FUNCTION
The WARM function maintains hot foods at the
recommended temperature to prevent bacterial
growth, 70°C or above.
1. Insert the wire rack into a rack position that best
suits the type of food you are keeping warm.
2. Place food, positioned on the included roasting
pan, pizza pan or other oven-proof dish, on the
center of the wire rack so air will flow around all
sides of the food.
3. Close the oven door.
4. Turn the FUNCTION dial until the indicator on
the LCD screen reaches the WARM function.
The top figure on the LCD screen indicates the
preset temperature of 70°C’, while the bottom
figure indicates the preset time of ‘:1 HRS’.
The preset KEEP WARM symbol will also be
displayed.
