Sage RIO SIX, Instruction Manual

Page: 33 / 75

O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
33
S A G E M E T E R I N G , I N C .
REV. 10-SIX/SRX
INSERTION STYLE
2
150#, 300#, or 600# flanged mounting is optionally avail-
able. Available probe lengths are 6", 12", 15", 18", 24", 30" or
36". Standard probe is 1/2" diameter.
SIX Series Integral Style Mass Flow Meters
IN-LINE STYLE
1,3
150#, 300#, or 600# flanged ends are optionally available.
(150# flanges recommended on 3" and 4" Flow Bodies)
1
NPT Fittings standard
2
Flanged Mounting available for high pressure operation
Depth: DC Enclosure depth is 4.35"
AC Enclosure depth is 5.35"
CAUTION:
Do not rotate the Enclosure of
In-Line Style Meters relative to
the Flow Tube, or the calibration
may be effected since the sensors
may become misaligned.
3/4" NPT for User Entry
(ONE ON EACH SIDE)
The plug(s) is to be replaced with an
Approved explosion proof cable
gland/strain relief. End user is also
responsible for providing ATEX Zone 1
approved cable for power and signal
6.75
6.78 Depth
Between
3.3" and 4.75"
See Chart
5.03
6.75
5.03
FLOW
FLOW
Available probe lengths
:
6", 12", 15", 18", 24" & 36"
3/4" NPT for User Entry
(ONE ON EACH SIDE)
The plug(s) is to be replaced with an
Approved explosion proof cable
gland/strain relief. End user is also
responsible for providing ATEX Zone 1
approved cable for power and signal