Sage RIO SIX, Instruction Manual

Page: 24 / 75

1
NOTE:
There are hidden jumpers (underneath the terminal strip) that short together the Blue
and Green wires, and also short together the Black and Orange wires. These extra wires are part of
the meter's Lead Length Compensation circuitry, allowing the user to change the length of the inter-
connect cable (from 0 to 1000 feet) without effecting the accuracy. 25 feet of cable are initially sup-
plied (for cabling longer than 1000 feet, contact Sage).
2
ATEX approved cable gland/strain relief is provided with unit.
3
Sage supplies 25 feet of cable for bench testing only. User is responsible to provide ATEX approved
cable for final installation.
S A G E M E T E R I N G , I N C .
O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
24
REV. 10-SIX/SRX
Junction Box Wiring Terminals for Remote Style Meters (Series SRX)
(THERE ARE NO ELECTRONICS INSIDE JUNCTION BOX)
SEE THE PREVIOUS PAGE FOR THE OTHER END OF THE REMOTE WIRING HOOKUP (the electronics side).
Blue
Green
Red
Orange
Black
White
CUSTOMER SIDE
1
(Wired at Installation site)
Metal Conduit is recommended
with appropriate grounding to
minimize effects from external
noise sources.
CAUTION: Strip wires 3/8"
and do not crimp insulation
FACTORY SIDE
(Wired at Factory)
Grounding Screw
GROUNDING SCREW NOT USED
(The shield [drain wire] is only connected
on the other end [the electronics end])
Red
Red
White
White
To terminal A1 to A6
(see pages 21–23)
NOTE: The Sensor Junction Box
will have a serial number tag. It
is important to match this serial
number with the serial number
of the Remote electronics. Mixing
components from different meters
can result in significant errors.
NOTE: The cable
provided is for
bench testing
ONLY – it is NOT
approved
3
.
4.85
ATEX approved
cable gland/strain
relief is provided
2