5
EN
Dicing
Disc
Lid
Large Feed
Chute
Medium
Feed Chute
Small
Feed Chute
Processing
Bowl
Motor
Base
Dicing
Grid
Geared
Spindle
Dicing
Distributor
Assembly
• Position the Processing Bowl onto the
Motor Base and turn the bowl clockwise
until the handle locks to the front.
• Before placing the lid onto the Processing Bowl,
place your Geared Spindle and position it over
the coupling in the centre of the Processing Bowl.
• If you intend to dice larger quantities
(more than 5 cups) please insert the Dicing
Distributor after placing your geared spindle
into the bowl. The Dicing Distributor will help
to distribute diced food evenly across the bowl.
WARNING
Do not touch the blades
of the Dicing Grid.
They are extremely sharp.
• Place the Dicing Grid, ensuring to align with
the 4 tabs in the bowl, then insert the Dicing Disc.
• Make sure you follow the right order and
to match your Dicing Disc with your
Dicing Grid. Each Dicing Grid creates cubes
in different sizes and has its corresponding
Dicing Disc in matching size.
• Do not use your Dicing Kit with the Disc Spindle.
Always use the Geared Spindle.
NOTE
Only use the Dicing Kit with SFP820
Food Processor or SFP006 Bowl & Lid.
SFP005_UG6_COMBINED_C21.indb 5
SFP005_UG6_COMBINED_C21.indb 5
20/4/21 10:51 pm
20/4/21 10:51 pm
