Ver. 7.0
You could enter into the programing mode to re-set the function code. To use and program the hotel
safe, please kindly read and follow the instructions carefully:
Important Tips
:
The digital in every position indicate the different function.If you wouldn’t like to change the current
setup,you only need to input the same digital in corresponding position or press
“#”
to enter
into the next screen till quit .
Once you changed their setup ,please press the key
“#”
to save the latest setup when quit the
programming mode.
Door position:
OPEN (initial code is
1234
;
initial master code is
000000
)
key in
“
＊＊
”
,the hotel safe LED will show
“
PROG
”,
then input the programming code
“
751019
”
in 5
seconds after “
PROG
” disappeared. Now the operation screen starts to enter into programming mode
(input key “#” again,you will enter into the second screen)
Program Mode
First Screen
The Options
:
(1) CODE APPEARANCE ON THE SCREEN
Press 0
– The presonal code number will not appear on the screen each time when you input the code
(namely is the screen just shows “
--------
” instead of digit code when you input the code to
open or
close
the door )
Default Parameter
Press 1
-The personal code number will appeared each time.
SAGA
