background image

 

 

Ver. 2.0 

                                                                                                                                   

   SAGA 

DATA DISPLAY OF HOTEL SAFE     

NORMAL DATA DISPLAY 

Again

 

:  

indicates that you need to key in the previously entered digits a second time

 . 

BA-HI 

:  

indicates that the batteries are normal.

 

BA-LO

:  

indicates that the batteries are low

Test battery energy 

When the door is closed,press the locking key “#”,and the battery energy test procedure will start.If the display

reads “BA-HI”,it means the batteries are normal;if the display reads “BA-LO”,it means the batteries are low and

must be replaced as soon as possible.

 

CLOSE

:  

indicates that the locking bolts are extending automatically.

 

DONE

:   

indicates that you have successfully completed the operation.

 

NEW

:    

indicates that you need to key in new digits right now.

 

OPEN

:   

indicates the locking bolts are retracing.

 

OPENED

:

 indicates the locking bolts have been retracted and you may open the door.

 

ERROR DATA DISPLAY 

when the following data appear on the display,it means an opeation error has occurred and you will need to

operate per the following instructions

HOLD15

This data appear on the display after you have enter the incorrect code for four times in a succession.It

means the electronic code system is now locked out and that you will not be able to operate the keys

until the system unlocks itself in 15 minutes. 

ERROR1

This data means the door fails to open as the bolts get stuck,In this case,give a push to the door to set

free the bolts before you perform the opening operation. 

ERROR2

This data indicates the bolts stud is being held (the door may be left unlatched) and locking bolts fail to

extend.In this case,give a push to the door until it firmly fit into place before you proceed with closing

operation. 

Summary of Contents for DCP Series








Reviews: