(5)
CODE NUMBER APPEARANCE AFTER SAFE’S DOOR CLOSURE
Press 0
- code number will be not shown after safe’s door is closed
Press 1
-code number will be shown each time after safe’s door is colsed.
(6)OPERATION MODE SETUP
Personal Mode :
Be suitable for private use.
Press 1- the user input his/her code and then press
LOCK(#)
or slide the credit card instead , the
safe’s memory will remember the last code. When you use the code or credit to open the door next
time,you must press
LOCK(#)
to close the door.
If you would like to set up a new code or card,you must reset the system power
.
(
push the
power swith from “
I
“(
on
) position to “O “(off ) and wait for 3 seconds before pushing it from “
O
“(
off
)
position back to “
I
“(
on
) position ).After the display will subsequently read
“
SECURE
”
and
“
GOOD
”,
you may set up a new code or card and then press lock(#) to close the door to complete the
operation
)
This mode is especially suitable for private use.
.
Hotel Mode :
Be suitable especially for hotels use.
Press 2 - the user input his/her code and then press
LOCK(#)
or slide the credit card instead ,a new
code or credit card can discretionarily be set up each time when the door is opened.
This mode is suitable especially for hotels use.
Safety Mode
Press 3 - the user input his/her code and then press
LOCK(#)
,
the display will subsequently read
“
CARD
“
and you may slide the credit cardinstead after it disappear
; or
you may first slide the credit card,the
display will subsequently read “
GOOD
“ ,and then you may input the code and press
LOCK(#)
to close the
door, the safe’s memory will remember the last code and card . When you use the code or credit to open
the door next time,you must press
LOCK(#)
to close the door.
Two system together ensure the double security.
PRESS LOCK(#) AND YOU WILL SEE THE SECOND SCREEN READY FOR PROGRAMMING.
Default Parameter
Ver. 7.0
Default Parameter
SAGA
