46
opening/closing the window, moving the window and switching the images and groups. The multi-screen
display configured on the
Safire Central
client software cannot be deleted by holding down the window and
clicking
.
4.3
Live View
For the admin and operators, the live view steps are the same. This section takes the operations of the
admin as an example.
Purpose:
After the device is successfully added, you can view the live video of the added network cameras and video
encoders in the
Live View
interface. And some other basic operations are supported, including picture capturing,
manual recording, PTZ control, etc.
The PTZ control should be supported by the added device.
Steps:
1.
Click
on the main menu to enter the
Live View
interface. The screen will be displayed in
1-division mode by default. The keyboard supports three modes of live view:
Local
,
Video Wall
and
External
.
Figure 4.36
Live View Interface
2.
Click
on the upper-right corner in the
Live View
interface to select the live view mode.
Summary of Contents for SF-KB1600NT
