4
Once the parameters have been setup, the virtual lanes must be placed in such a way as
to coincide with the physical lanes of the road and also cover the area from which the Number
Plate information will be obtained, as below:
Remember to click on
“Save”
in order to store the parameters and areas which you have
defined.
*It is important adjust the image parameters (brightness, contrast, saturation, etc.)
correctly to suit the lighting conditions
2.3
Exposure time adjustment and scene settings
Ensure that the exposure time is correct, this enables the camera to process vehicles at
speed. It is recommended to begin with exposure times less than 1/175 to 1/250. Use these
values as starting points and adjust according to the individual circumstances.
To change this parameter, click on
“Image”
from within the Configuration menu then
select the drop-down menu
“Mounting Scenario”
and select the
“Road”
mode.
*This will modify the image parameters of the camera.
Under
“Exposure Settings”
you can regulate the exposure time, which should be reduced
in relation to the average speed of vehicle movement increases.