2
For the correct working of the Automatic Number Plate Reading camera, you must
strictly follow the instructions in this manual. Before committing to any installation, it is
recommended to review the environmental conditions, as well as the relative size within the
image of the number plates to be read.
It is also recommended to check that the camera has the latest firmware upgrades
installed. Please note that this manual may change without prior notice and may differ with
regard to future firmware releases.
1.
CAMERA INSTALATION.
For correct operation of the Automatic Number Plate reading function, the following
installation recommendations
should
be closely followed.
Firstly, the camera must be installed at a minimum height of
1.6 meters
and a maximum
height of
2 meters
. Ensure that between the camera and the reading position of the vehicle
there must be a minimum of
6 meters
:
The lateral angle of inclination of the camera is also relevant to the installation process,
and it is recommended that the camera is positioned at an
angle greater than 25
ᵒ
:
Once the camera is installed, check that the number plate is not too far off-horizontal in
such a way as to
exceed 5
ᵒ
in either direction as this could make it difficult to correctly read the
registration.
With the number plate now correctly positioned it is important that it’s size is
at least 130 pixels
high
, and up to a maximum of 500 pixels.
