background image

OBSERVER 4100 USER GUIDE

11

Video Playback

To view recorded video with an attached external 

monitor, use the remote to access the menu, then select 

the first icon.  The All Files and Event Files options appear.

Select the 

All Files

 option to review all recorded video 

stored.

Select the 

Event Files

 option to review only video 

marked as events.

The 

File/Event Search

 screen appears.  

Use the arrow keys on the remote control 

to select a specific day on the calendar, 

or use the provided fields to narrow your 

search and select the 

Search

 button at 

the bottom of the screen.

All Files

FILE SOURCE:

 Select the source to search 

(SD).

FILE TYPE

: Select a specific type of event 

to search for.

CHANNEL: Select a specific channel that 

was recording.

DATE

: Select a specific date when the 

video started recording.

START/END TIME

: Select a specific 

time when the video started recording.  

The Observer 4100 searches the hour 

following the time entered in this field.  

For example, enter “14:00:00” searches 

for video from 2:00 pm to 3:00 pm.

Event Files

EVENT TYPE: 

Search only for one type of event.

DATE

: Select a specific date when the video started 

recording.

Summary of Contents for OBSERVER 4100































































Reviews: