Low Voltage Protection
The Low Voltage Protection menu
controls the voltage threshold before
the DVR shuts down automatically to
protect itself.
Use the remote control to configure
the following:
ENABLE:
Select
ON
to enable voltage
protection.
LOW VOLTAGE:
Enter the minimum
voltage, in volts, that the DVR can
receive before it automatically
disconnects from the CMS or shuts
down.
VOLTAGE OF START
: Enter the voltage,
in volts, that the vehicle typically drops
to during startup (the ignition key is
turned).
INTERNAL TIME FOR CMS:
Select the
time, in minutes, that the DVR can continue to receive the
voltage indicated in the VOLTAGE field before disconnecting
from the CMS.
SHUT DOWN DELAY:
Select the time, in
minutes, that the DVR can continue to receive the voltage
indicated in the
LOW VOLTAGE
field before automatically
shutting down.
ICOP PRO USER GUIDE
49
Summary of Contents for ICOP PRO
