Acceleration
The Acceleration menu controls the
thresholds of the DVR’s accelerometers
that trigger an G-FORCE (GF) event.
Use the remote control to configure
the following options:
EN:
Select
ON
to enable the SHK event.
Select
OFF
to disable it.
THRESHOLD:
Use the number keys
on the remote control to enter the
amount of force (in Gs) for each axis
(
X
,
Y
, and
Z
) at which the event is
triggered.
ALARM:
Select
ON
to enable the ALM
LED on the front of the DVR when the
THRESHOLD force is reached and an
event is triggered. This LED continues
to flash after an event is triggered until
the configuration menus are accessed.
LOCK:
Select
ON
to lock the video of the event recorded
when the THRESHOLD force is reached (not allowing it to be
overwritten).
46
ICOP PRO USER GUIDE
Summary of Contents for ICOP PRO
