Safety Vision ICOP PRO, User Manual

Page: 15 / 66

MCAM2
1 - Zoom -
- Adjusts zoom to wide end.
• Single Press: Decrement zoom step x1
• Double Press: Decrement zoom to Wide End position
• Press and Hold: Decrement smooth sweep of zoom
value
2 - Focus
- Switch between Auto Focus and Manual Focus.
•
Press and Hold: After beep, focus button will flash
(Manual Focus mode enabled)
•
Press Zoom +: Increment Focus to Tele End
•
Press Zoom -: Decrement Focus to Wide End
•
Single Press: Focus button stops flashing (Auto Focus
mode enabled)
3 - Zoom +
- Adjusts zoom to tele end.
• Single Press: Increment zoom step x1
• Double Press: Increment zoom to Tele End position
• Press and Hold: Increment smooth sweep of zoom value
4 - Auto Zoom
- Zoom to a preset value for 10 seconds,
then return to wide end.
• Single Press: Perform Auto Zoom
• Preset Auto Zoom Value:
1.
Adjust Zoom to desired position
2.
Press and hold Auto Zoom button
Audible alert sounds to confirm setting
5 - Covert
- Toggle on/off for keypad backlight.
• Single Press: Toggle Covert Mode
6 - Driver’s License
- Changes camera to allow close up
focus to capture a driver’s license held in front of the camera.
•
Single Press: Button flashes; Driver’s License Mode
enabled for 30 seconds
• Second Single Press: Exit Driver’s License Mode
ICOP PRO USER GUIDE
13
13