safety precaution HTP-T32G, User Manual

Page: 42 / 55

H.264 IP Camera Manual
42/4
‰
White Balance (White BAL)
When it needs color control on the screen, use ‘WHITE BALANCE’ function.
①
Press the SET button to display the SETUP menu and move the arrow indicator to ‘WHITE
BALANCE’ using Up or Down button.
②
Set ‘WHITE BAL.’ to the desired mode using Left or Right button.
③
ATW (Auto Tracking White Balance) : When color temperature is 2400~12,000k, select this
mode. (Ex. A fluorescent lamp, outdoor)
④
AWC (Auto White Balance Control) : The white balance is automatically adjusted in a specific
environment. In order to obtain the best result, press the set button while the camera focuses
on the white paper. If the environment including the light source is changed, you have to adjust
the white balance again.
⑤ Manual : To find adjust, select the Manual mode. You can increase or decrease the red or blue
factor while monitoring the difference on the screen. Set to ‘Manual’ mode and press the Set
button. Increase or decrease the value for RED (R-Gain) and BLUE (B-Gain), watching the
color of the picture, and press the Set button when you obtain the best color.
⑥
Proper White Balance may not be obtained under the following conditions in these cases select
the AWC mode; when the scene contains mostly high color temperature object, such as a blue
sky or sunset. When the scene is dim. If your camera faces fluorescent lamp directly or is
installed in the place of the changing illumination
.
‰
Backlight
SR chip built-in provides intelligent light level control to overcome the sever Backlight condition.
① Press the Set button to display the SETUP menu and move the arrow indicator to
‘BACKLIGHT’ using the Up or Down button.
②
Set ‘BACKLIGHT’ to the desired mode using the Left or Right button
‰
Auto Gain Control (AGC)
AGC is to get bright picture. Higher GAIN level, brighter screen. But you can get noise increase.
Press the Set button to display the SETUP menu and move the arrow indicator to ‘AGC’ using the
Up or Down button
REMOTE CONFIGURATION
9. CAMERA Configuration
4