safety precaution HTP-T32G, User Manual

Page: 36 / 55

H.264 IP Camera Manual
36/4
7.Preset Configuration
This function is only available when a PTZ receiver is used with HTP-T32G
Configure up to 15 preset positions. Preset function is not available on some PTZ receivers. Make sure
to check if a PTZ receiver supports preset
‰
Preset Configuration
z
Set the PTZ Presets by following the next steps
c Move cameras to desired view using PTZ control buttons.
d Enter Preset name.
e Press
Set
button.
f Once all the presets are set, press
Save List
button.
z
Move to Preset Position
Select a preset from the Preset and press
Go To
button, then, the camera will move to the
selected preset position.
REMOTE CONFIGURATION
7. Preset Configuration
4
d Enter Name
c Move PTZ Camera
to normal view
e Press Set Button
f
Save