safety precaution HTP-T32G, User Manual

Page: 13 / 55

H.264 IP Camera Manual
13/4
1. Remote Video Monitoring
There are two ways to monitor video when the decoder site and HTP-T32G are connected. In order for a
proper operation, an IP address must be set accordingly. Please refer to
True Manager in Chapter 3
or
Remote Setting in Chapter 4
for further details.
Default ID : admin Default Password : 1234
‰
Video Monitoring with Decoder System
Once HTP-T32G’s IP address is set in the remote IP address section of the decoder, the decoder system
will connect to HTP-T32G and start receiving the video images. Normally, a monitor connected to the
decoder will display video images.
‰
Video Monitoring using Internet Explorer
Open Internet Explorer and enter HTP-T32G’s IP address. The system will ask for confirmation to install
Active-X control. Once authorized, the Internet Explorer will start to display video images from HTP-
T32G as shown below.
Default IP Address : http://192.168.10.100
SYSTEM OPERATION
3