[email protected] • (610) 941-4333 • www.safetyhoistcompany.com • 10
Operator’s Manual
EH-500 Electric Material Hoist
HOW TO OPERATE YOUR HOIST
Continued
5. Return carriage assembly to base position. You
can begin loading the carriage with material at
this time.
- DO NOT EXCEED THE HOIST WEIGHT
LIMIT!
6. Press the UP button on the pendant to start the
winch and launch carriage into its upwards travel.
-
The button must be pressed the entire time it takes
to reach the unload position at the peak. When the
carriage unloading flap rotates into the unload position,
release the UP button to stop the winch.
7. After job is complete, disconnect the pendant
and the power cords and store them in the
compartment provided.
SEE FIGURE 12
FIGURE 12
